ADI UPP Acrylic primer (Grey) 2K 5+1 ACTYLIC FILLER HS + Acrylic primer hardener (set 1l + 0.2l)

Acrylic primer, gray 2K 5+1 (ACTYLIC FILLER HS) + Acrylic primer hardener, ADI UPP

COUNTRY OF MANUFACTURER: Italy

Acrylic two-component soil with a high level of pore filling and a very high level of dry residue upon application. The product can be used both as an insulating soil and as a soil with a standard level of pore filling.

MAIN ADVANTAGES:

1. Multifunctionality:
- high level of filling (mixing ratio 5:1 – 80 microns per 1 application layer)
- standard filling (mixing ratio 5:1:0.5 – 60 microns per 1 application layer).
- insulating soil (mixing ratio 5:1:1 – 35 microns per 1 application layer).
2. Lightness during grinding.
3. Almost zero absorption of the gloss of the finish coating.
4. Smooth and satin appearance in the insulating version.
5. Can be applied both under water-based enamels and under solvent-based enamels.
6. Has excellent adhesion to bare metal.
It is recommended to apply on anti-corrosion soils for better anti-corrosion protection. Use flushing solvent or nitro thinner to flush the equipment.



Dry residue - 72.86 / 100 gr
Soil viscosity (viscometer B3-6) – 112 sec.
The density of the soil is 1.62 / 1620 g / l
Viscosity of the finished mixture (viscometer B3-4) – 50 seconds.
The density of the finished mixture is 1.52 / 1520 g / l
Drying time – 50 min.
Grinding is excellent
The soil can be used in three ways:
1. Pore-filling soil, mixing ratio 5:1 - without adding a thinner. 80 microns for 1 application layer. Up to 240 microns in three layers.
2. Standard filling, mixing ratio 5:1:0.5 (Thinner ADT.4400) - 60 microns per 1 layer of application.
3. Wet-on-wet primer, mixing ratio 5:1:1 (thinner ADT.4400) - 35 microns per 1 application layer.
The product has excellent adhesion to bare metal. It is recommended to apply it on anti-corrosion soils for better anti-corrosion protection.